Lorex SG14Q5044-A 14-inch Color Quad Observation System with 4 Cameras

The SG14Q5044-A's 14-inch color monitor can be operated via its built-in main panel or via the included remote control. Constructed within a durable metal cabinet, this monitor includes four DIN/BNC (Bayonet Neill-Concelman, RF-type) composite video inputs, and four RCA audio inputs. Also included are four alarm inputs with one alarm output. Multi-voltage compatible, the SG14Q5044-A's monitor runs on 110- to 220-volts of power, and achieves 380 TVL (TV lines) at center resolution at up to 30 frames per second (frames per second). This monitor has an operating temperature of 32- to 104-degrees Fahrenheit.

The four cameras that comes with the SG14Q5044-A utilize 0.25-inch color CCD (charge-coupled device) image sensors, and 3.6mm fixed lenses. Powered from the monitor via the connecting cables, these cameras achieve a horizontal resolution of 350 TVL with 510 by 492 active picture elements. Constructed of durable ABS (Acrylonitrile Butadiene Styrene) plastic, these cameras can receive a usable picture in low-light conditions with a minimum illumination of one Lux. The SG14Q5044-A's cameras come with their own 63-foot connection cables allowing you to install them virtually anywhere, and can operate in temperatures ranging from 14- to 122-degrees Fahrenheit.

Technical Features:

• Camera lenses: 3.6mm fixed
• Image sensor: 0.25-inch color CCD
• Sensitivity: minimum illumination of 1 Lux
• Resolution: monitor 380 TVL at 30 frames per second, camera 350 TVL
• Operating temperature: 14 - 122 degrees Fahrenheit for camera; 32 - 104 degrees Fahrenheit for monitor
• Monitor dimensions: 14 x 15 x 13 inches (W x D x H)
• Camera dimensions: 2.25 x 2.5 x 3.33 inches (W x D x H)

About Surveillance Camera Technical Features
Lux rating is the measurement used to indicate how sensitive a camera is to light, and stands for the level of light reflected off a piece of paper by a candle from one meter away. Thus a sensitivity of three Lux would mean a camera could generate an acceptable picture of a piece-of-paper-sized object that was illuminated by the equivalent of three candles from one meter away. The lower the Lux level, the better the camera's ability to work in low-light conditions. The camera's resolution should be greater than or equal to the resolution supported by the system's recorder or monitor. The S/N, or signal to noise ratio, is an important measure of a camera's quality. A poor camera, low-light conditions or poor wiring causes "noise" which consumes processing power and disk space. A camera with a wide dynamic range is ideal, especially for recording areas in which both indoor and outdoor light are present. CCD (charge-coupled device) sensors provide high-quality images that are less susceptible to noise. CMOS (complimentary metal-oxide semiconductor) sensors offer less image quality, but are usually more cost-effective and energy efficient.

What's in the Box
Color quad monitor, remote control, 4 x cameras, 4 camera stands, 4 cables (56 feet), and installation hardware.